An ISO 9001-2015 Certified Company

Pure-Polyester Powder Coatings

Pure Polyester powders are extensively used for industrial use where the requirement is good for atmospheric conditions. These powders have excellent light and weather fastness with superior gloss and colour retention. They are weather resistant to environmental conditions such as UV rays, rain, heat and dust etc.

General Features
We call our Pure-Polyester powders as the green range of powders as well. Pure-Polyester powder contains polyester resins along with other additives selected specially for their excellent UV resistance and outdoor weathering. The powder forms protective and decorative film along with enhanced outdoor resistance.

General Features

Polyester Powders also known as Hybrid powders. Hybrid is a combination of Polyester resins. The coating forms a hard film on the substrate with good resistance to mechanical damage. It has good resistance to yellowing of the surface film and has very limited orange peel. Wide ranges of gloss finishes are available in this type of chemistry including High quality powder coating powder and paints.

Advised Cycles
The surface to be coated must be cleaned from oils, grease or flash rust.

Curing Temperature
The Curing schedule is 10-12 minutes @200 ºC metal temperature

Handling and Storage
Store in a cool and dry place at a temperature lower than 30°C. Higher temperature may damage the chemical and mechanical properties of the powder.

Application
Because of its special content, these powders are suggested specially for exterior coating.

It is always recommended to use a top coat with transparent powders on the top of the metallic powders. The top coat prevents oxidation of the metallic pigments of the base coat thus enhancing the life of the coating.

Agricultural equipment, aluminium profiles for buildings, lawn and garden equipment, outdoor furniture, recreational equipment, wheels and rims, architectural facades & windows.